Plunge Anytime and Skip the Ice Runs With the Titan Atlas Ice Bath
Dragging bags of ice home five times a week gets old fast, and a cold plunge that takes an hour of prep before you even get wet is one you end up skipping. Pick your setup here and that problem disappears: a 4" military-grade drop-stitch PVC tub with a built-in seat, paired with a chiller that holds water at 37°F (3°C) with no ice at all. Fill it once, cover it, and plunge whenever you want.
-
No ice needed: chiller options hold water at 37°F (3°C) around the clock, no ice runs required.
-
Choose your power: 1/3HP, 1/2HP, or 1HP chillers cover climates up to 85°F, above 85°F, or above 100°F, or skip the chiller and use ice.
-
Clean water, less work: sediment filter, 20-micron filter, and UV sanitization keep water clear for up to 8 weeks between changes.
-
Platform choice: Gen IV runs standard filtration with an external pump and no app, All-in-One Gen V adds the 3-stage system, dual pumps, and app control in one unit.
-
Remote control: the All-in-One Gen V connects to WiFi so you can adjust temperature and schedules from your phone.
-
Tough build: 4" military-grade drop-stitch PVC wall keeps the tub rigid and insulated, free from BPA, phthalates, and other chemicals.
-
Full-body soak: 232-gallon capacity with a built-in seat for upright, neck-deep immersion, suitable for people up to 7'2".
-
Cover included: the insulated inflatable cover seals in cold and keeps out debris.
-
Fast setup: tool-free hose connections and clip-on steps get you soaking in about 15 to 20 minutes.
-
Low running cost: chillers cost around $0.50 to $1.50 per day to run. Running cost depends on your climate, settings and electricity rates.
-
Colors: available in Midnight Black or Arctic White.
-
Peace of mind: backed by a 2-year warranty, extendable to 5 years on the chiller.
Variant comparison
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| SKU |
TITGENI13HP |
TITGENI13HP-2 |
TITGENI12HP |
TITGENI12HP-2 |
TITGENI1HPP |
TITGENI1HPP-2 |
TITGENINOCH |
TITGENINOCH-2 |
10011 |
10012 |
TITALLI12HP |
TITALLI12HP-2 |
TITALLI1HPP |
TITALLI1HPP-2 |
| Platform |
Gen IV · standard filtration · external pump · no app |
Gen IV · standard filtration · external pump · no app |
Gen IV · standard filtration · external pump · no app |
Gen IV · standard filtration · external pump · no app |
Gen IV · standard filtration · external pump · no app |
Gen IV · standard filtration · external pump · no app |
Gen IV · standard filtration · external pump · no app |
Gen IV · standard filtration · external pump · no app |
All‑in‑One Gen V · advanced 3‑stage + UV · dual‑pump · app‑controlled |
All‑in‑One Gen V · advanced 3‑stage + UV · dual‑pump · app‑controlled |
All‑in‑One Gen V · advanced 3‑stage + UV · dual‑pump · app‑controlled |
All‑in‑One Gen V · advanced 3‑stage + UV · dual‑pump · app‑controlled |
All‑in‑One Gen V · advanced 3‑stage + UV · dual‑pump · app‑controlled |
All‑in‑One Gen V · advanced 3‑stage + UV · dual‑pump · app‑controlled |
| Chiller option (cooling) |
1/3HP · 815W · cools to 37°F · best ≤85°F |
1/3HP · 815W · cools to 37°F · best ≤85°F |
1/2HP · 1141W · cools to 37°F · best >85°F |
1/2HP · 1141W · cools to 37°F · best >85°F |
1HP · 2600W · cools to 37°F · best >100°F |
1HP · 2600W · cools to 37°F · best >100°F |
No chiller · use ice |
No chiller · use ice |
1/3HP · 815W · cools to 37°F · best ≤85°F |
1/3HP · 815W · cools to 37°F · best ≤85°F |
1/2HP · 1141W · cools to 37°F · best >85°F |
1/2HP · 1141W · cools to 37°F · best >85°F |
1HP · 2600W · cools to 37°F · best >100°F |
1HP · 2600W · cools to 37°F · best >100°F |
| Price |
$1397.00 |
$1397.00 |
$1788.00 |
$1788.00 |
$2089.00 |
$2089.00 |
$899.00 |
$899.00 |
$1576.00 |
$1576.00 |
$2027.00 |
$2027.00 |
$2438.00 |
$2438.00 |
| Finish |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Chilling Down to 37°F Without a Single Bag of Ice
Every chiller option cools water down to 37°F (3°C). More power means faster pulldown and steadier hold in hot, humid air. Choose by your climate:
-
1/3HP Water Chiller: 815W compressor, 4A. Best for climates up to 85°F. Cools 4-6 hours per 100 gal. 44lbs (20kg).
-
1/2HP Pro Chiller: 1141W compressor, 6A. Best for climates above 85°F. Cools 2-4 hours per 100 gal. 52lbs (23.6kg).
-
1HP Pro+ Chiller: 2600W compressor, 8.5A. Best for climates above 100°F. Cools 1-2 hours per 100 gal. 64lbs (29kg), with wheels. Also heats at 3100W.
-
No Chiller: tub only, use ice.
All units run on a standard 110V US outlet and are rated for indoor and outdoor use. Place yours under cover or shade and keep it out of direct sun for the best results.
Triple Filtration and UV Sanitation Keep the Water Clear
Cloudy water is what kills most home plunge habits. Three stages work together instead of one:
-
Sediment filter catches dirt and hair first
-
20-micron filter traps the smaller particles that slip past
-
UV sanitization helps keep water clean for up to 8 weeks between changes
Dual internal pumps circulate water 24/7 so nothing sits still, and the twist-lock cap means filter swaps take seconds. Gen IV uses standard 20-micron filtration with an external pump and filter. All-in-One Gen V brings the advanced 3-stage system with UV and the dual-pump design together in one plug-and-play unit.
Smart App Control on the All-in-One Gen V
Built-in WiFi on the All-in-One Gen V puts the whole system on your phone from anywhere. Turn the unit on or off, dial in the temperature, and set schedules so the water is already cold when you walk out the door after a session. The Gen IV platform runs without app functionality.
Why the Titan Atlas Cold Plunge Tub Is Built From 4" Drop-Stitch PVC
The wall is three layers: an outer PVC skin, an inner PVC skin, and thousands of nylon drop-stitch threads holding them apart at a rigid 4 in (10 cm) thickness. That structure does two jobs at once. It keeps the barrel standing upright and firm like a hard tub, and it insulates, so your chiller works less to hold temperature.
The material is free from BPA, phthalates and other chemicals, and the whole tub weighs just 35lbs (16 kg) empty, so one person can move it. Choose Midnight Black or Arctic White.
A Built-In Seat for Upright, Full-Body Immersion
Lying flat in a shallow tub means half your body stays dry and your breathing goes ragged. Sitting upright changes everything. The integrated seat measures 14x31in (35.5x78.7cm) and sits 13 in (33 cm) from the bottom, 30 in (76.2 cm) down from the top rim.
- Calm, controlled breathing in a natural posture
- Back and legs supported instead of braced
- Deep immersion up to the neck in a compact footprint
At 232 gallons (878 liters) and 38.5×38.5×45 in (97.8×97.8×114.3 cm), there is room for a full-body soak without dominating your patio or garage. Plan for a 6'9" x 3'2" footprint, and know the tub is suitable for people up to 7'2".
Insulated Cover That Locks the Cold In
The patent-pending inflatable insulated cover is 8.5 in thick, uses the same 4 in drop-stitch PVC core and seals all the way around the rim with buckles. Two things happen when it is on: leaves, dust and debris stay out of your clean water, and the cold stays in, so your chiller cycles less often and your running costs drop.
Clip-On Steps and Tool-Free Setup
Getting in should not be the hardest part. The included steps measure 29×24×18.5 in (73.7×61×47 cm), weigh only 6.5 lb (2.9 kg), and use a buckle that clips them directly to the tub so they cannot slide. The decking is anti-slip and built from the same drop-stitch PVC.
Setup is just as painless. Quick-connect insulated hoses push straight onto the color-coded Water IN and Water OUT ports with no tools required. Expect around 20 minutes from box to filled tub, and roughly 15 minutes for the All-in-One Gen V system.
Integrated Brass Water Ports Instead of Hoses Over the Rim
Instead of hoses draped over the edge, the brass inlet and outlet connectors are built into the tub wall, labelled green for Water IN and red for Water OUT. Nothing crosses the rim, nothing snags, and the 65in (165cm) insulated hose set runs a clean line straight to the chiller.
Washable Mesh Fan Filter Protects the Compressor
Dust, hair and garden debris are what quietly kill outdoor chillers. The patent-pending washable mesh fan filter sits over the intake and catches all of it before it reaches the fan. Pull it out, rinse it, slide it back. Cleaner airflow means less overheating risk and a longer working life from the unit.
What You Get With the Titan Atlas Barrel Ice Bath
Included with the tank:
- 1x Inflatable Insulated Cover
- 1x 2-Way Air Pump + Hose
- 2x Drain Valves
- 1x Phone Holder, a clamp-and-arm mount for the rim so you can time your session or watch something while you soak
- 1x Repair Kit
- 1x Carrying bag
- 1x Garden hose adapter
Included with the chiller:
- 2x Hose connectors and seal rings
- 1x Hose set with hose insulation
- 1x 20-micron water filter and pump unit
- 1x Sediment water filter
- 1x Fan dust filter
- 1x GFCI power cable (US 110V plug)
- 1x Detailed instruction manual
A Cold Plunge Routine That Fits After Training
Cold immersion is a popular post-training routine for many people. Having a tub a few steps from your door makes it easier to keep a regular cold plunge routine.
Running Costs Compared to Ice
The chiller uses standard refrigeration technology, much like a home fridge, and only runs when cooling is needed. Estimated operating cost sits around $0.50 to $1.50 per day depending on your environment and usage:
-
1/3 HP Standard (815W): approx. 3-5 kWh/day, $0.50-$0.80 per day. Input power 330W.
-
1/2 HP Pro (1141W): approx. 5-7 kWh/day, $0.70-$1.10 per day. Input power 520W.
-
1 HP Pro+ (2600W): approx. 7-10 kWh/day, $1.00-$1.50 per day. Input power 750W.
Those estimates assume typical U.S. electricity rates and moderate conditions, around 77°F ambient with the unit set to ~46°F. Actual usage varies with climate, insulation and how often you plunge.
Now compare that to ice. A session takes roughly 15-40lbs at about $3 per 10lbs.
Warranty, Returns and Support
Every system is backed by a 2-year warranty, with an extended 5-year option available on the chiller. Restrictions apply. Lifetime U.S.-based support stands behind the product, and 0% APR financing is available. Contact Us if you need a hand.
Shipping From California
Orders ship from our California warehouse, typically within 1-2 business days (pre-orders excluded), and tracking is emailed as soon as your order is dispatched. If a delivery attempt fails, the carrier tries again the next business day; after 3 failed attempts the package returns to our facility and a reshipping fee applies.
Product Specs
| Spec |
Value |
| Tub dimensions |
38.5×38.5×45 in (97.8×97.8×114.3 cm) |
| Footprint |
6'9" x 3'2" |
| Suitable for |
People up to 7'2" |
| Wall thickness |
4 in (10 cm) |
| Cover thickness |
8.5 in |
| Water capacity |
232 gallons (878 liters) |
| Empty tub weight |
35lbs (16 kg) |
| Tub material |
4" military-grade drop-stitch PVC, BPA and phthalate free |
| Seat dimensions |
14x31in (35.5x78.7cm) |
| Seat height |
13 in (33 cm) from bottom; 30 in (76.2 cm) from top |
| Steps dimensions |
29×24×18.5 in (73.7×61×47 cm) |
| Steps weight |
6.5 lb (2.9 kg) |
| Platform options |
Gen IV (standard 20-micron filtration, external pump and filter, no app) or All-in-One Gen V (advanced 3-stage filtration + UV, dual-pump plug-and-play, app controlled) |
| Chiller options |
1/3HP Water Chiller, 1/2HP Pro Chiller, 1HP Pro+ Chiller, or No Chiller (use ice) |
| Minimum water temperature |
37°F (3°C), all chiller models |
| Cooling capacity |
815W (1/3 HP) / 1141W (1/2 HP) / 2600W (1 HP) |
| Heating capacity |
3100W (1 HP only) |
| Input power |
330W (1/3 HP) / 520W (1/2 HP) / 750W (1 HP) |
| Current draw |
4A (1/3 HP) / 6A (1/2 HP) / 8.5A (1 HP) |
| Power supply |
Standard 110V US outlet, GFCI power cable |
| Cooling time |
4-6 hrs per 100 gal (1/3 HP) / 2-4 hrs (1/2 HP) / 1-2 hrs (1 HP) |
| Recommended climate |
Below 85°F (1/3 HP) / Above 85°F (1/2 HP) / Above 100°F (1 HP) |
| Chiller dimensions |
17x12x14in (43.2x30.5x35.6cm) 1/3 HP / 17x14x14in (43.2x35.6x35.6cm) 1/2 HP / 19x15x21in (48.3x38.1x53.3cm) 1 HP |
| Chiller weight |
44lbs (20kg) 1/3 HP / 52lbs (23.6kg) 1/2 HP / 64lbs (29kg) 1 HP |
| Hose length |
65in (165cm) |
| Filtration |
Sediment filter, 20-micron filter, UV sanitization, washable mesh fan dust filter |
| Connectivity |
Built-in WiFi app control (All-in-One Gen V) |
| Placement |
Indoor and outdoor, shaded or covered area recommended |
| Color |
Midnight Black or Arctic White |
| Warranty |
2-year, extendable to 5 years on the chiller |