AMBOHR Mini Chiller Cold Plunge Chiller 0.8 HP Cools to 41°F

Everything you need sits on one panel. A three-digit display shows your reading at a glance, with power and mode buttons, snowflake, auto and filter icons, and up and down arrow keys for adjustments, all set above the perforated grille.

• High-precision temperature sensors give you control across a 41°F to 86°F range
• Simple, intuitive layout so you can start and personalize a session in seconds
• Track your sessions directly on the readout, no app or extra hardware needed

Set your number once and the unit handles the rest, holding the chill while you focus on your breathing.

A 20-micron filter works continuously while the water chills, so what you step into stays crystal clear. The pleated cartridge, with its blue end caps and measuring 2.7in (68mm) wide by 7in (180mm) tall, lifts straight out of the top-corner port with a white screw-in cap, and that cap's lever handle and lock arrows make maintenance a one-minute job.

• Replaceable cartridge that installs and swaps out without tools
• Blocks debris and hair before it circulates back into your tub
• Protects the water pump and chiller from the grit that shortens equipment life

Wipe the exterior down with a damp cloth now and then and avoid excessive water exposure to protect the internal components. That is the whole cleaning routine.

Running at roughly 50db, measured on a scale that runs between 30db and 80db, this unit sits comfortably between a whisper and a conversation. You can leave it going in an apartment, a bedroom corner, or a shared living space without it dominating the room.

Low power draw matters just as much when the unit runs regularly. At 0.8kw with an 80W water pump, it is built for lower consumption than larger chillers in the lineup, which makes it a sensible match for smaller homes and tighter electrical setups.

At 12.99in x 15.75in x 12.8in, which breaks down to 12.80in high, 12.99in deep and 15.75in wide, and 24.5kg (54.01lbs), this is the smallest chiller in the range and the easiest to move. Tuck it beside your tub at home, shift it to the patio, or take it along when you travel.

• Heavy-duty, weatherproof housing rated for indoor and outdoor use
• Premium insulation that holds temperatures consistently rather than cycling hard
• Finish options: White or Black, both with the same signature styling
• Thoughtful hardware layout: cooling holes and top vent slots for airflow, two white threaded water inlet and outlet connectors at the rear, a recessed power jack socket beside them, and the LED display screen and replacement filter port up front

To avoid premature wear, keep exposure to direct rainfall and intense sunlight to a minimum. That one habit protects the internal components over the long haul.

Full assembly takes about 5 to 7 minutes. Run the two white hoses between the chiller's threaded inlet and outlet connectors and the lettered A and B ports on your tub, plug into a standard outlet, and let it run. A video tutorial is available by scanning the QR code in the instruction manual.

One important step before first use: after the package arrives, place the unit on a flat surface and let it sit undisturbed for 24 hours before switching it on.

This chiller is compatible only with the Deeptime AirCore S, the budget-friendly inflatable plunge built for affordability and portability. Inflate it with the included air pump, fill it from a standard garden hose, and you are ready. The ice bathtub itself is not included with the chiller.

The Mini sits at the entry point of the lineup, built for people who want genuine cold plunge temperatures without the footprint or power draw of a full-size unit. Against rival units it is compared on cooling, compatibility, noise, power efficiency and display panel.

• Mini Chiller: 0.8 HP, 0.8kw, cooling only, 41°F, 55A pump at 80W, 24.5kg (54.01lbs)
• Ultra Chiller: 1 HP, 1.19kw, cooling and heating, 34℉ to 104℉, 80A pump at 150W, 45kg (99.21lbs)
• Pro Chiller: 1 HP, 1.19kw, cooling and heating, 34℉ to 104℉, 60A pump at 120W, 45kg (99.21lbs)
• All-in Gen3: 1 HP, 1.19kw, cooling and heating, 32℉ to 104℉, 80A pump at 150W, 112kg (246.92lbs)
• All-in Gen2: 1 HP, 1.19kw, cooling, 34℉, 80A pump at 150W, 103kg (227.08lbs)

Your order ships free, direct from our CA or Texas facility, and includes everything needed to get running.

• 1 x Durable AMBOHR Chiller
• 1 x AMBOHR Drainage System for effortless water removal and quick cleaning
• 1 x AMBOHR Instruction Manual with step-by-step setup
• Power cord and water filter
• 1-Year full warranty
• 24/7 customer support

Choosing a Plunge and Chiller bundle instead? That purchase also includes the chiller unit and connecting hoses. Free gifts do not carry after-sales service.

How cold does it actually get?
Down to as low as 41°F, giving you real ice bath conditions without handling ice.

Can I use it outside?
Yes. The weatherproof build handles a home, gym, backyard or patio. Just limit direct rain and harsh sun to protect the internals.

Which tub does it work with?
The Mini Chiller is compatible only with the Deeptime AirCore S.

Does it heat water too?
No. This model is cooling only. The Ultra and Pro models handle both cooling and heating.

How long does setup take?
Roughly 5 to 7 minutes to connect the tub and chiller with the two hoses at the A and B ports. Remember to let the unit rest flat for 24 hours after delivery before the first run.

How do I clean it?
Wipe the unit with a damp cloth and avoid excessive water exposure. Replace the filter cartridge as needed.

Is there a warranty?
Every order includes a 1-year warranty. If something goes wrong, Contact Us and we will make it right.