Bring Spa-Level Recovery Home With the KoreLight KorePOD Wellness Pod
Tired of booking pricey sessions at a high-end wellness center just to unwind and recover? Now you can enjoy that same luxury in your own home. The KorePOD brings red light, near-infrared light, PEMF, infrared warmth, negative ions, and a crystal stone mattress together in one beautifully engineered chamber. Inspired by the immersive KoreLUX™, it is the flagship at-home system in the Kore lineup. Lie back, disconnect from daily stress, and turn recovery, relaxation, healthy aging, or performance into a daily wellness ritual you actually look forward to.
-
All-in-one session: Red light, near-infrared light, PEMF, infrared heat, negative ions, and a crystal stone mattress in a single chamber.
-
1,120 high-output lamps: Three LEDs per lamp for head-to-toe coverage.
-
Two light wavelengths: 224 lamps at 850nm near-infrared and 896 lamps combining 660nm red light with 850nm near-infrared in a 1:2 ratio.
-
Upgraded Epistar LEDs: Built for stable, consistent, and uniform light delivery.
-
PEMF support: Gentle pulsed electromagnetic fields at 1-30Hz, designed to support overall wellness and relaxation.
-
Carbon fiber heat: High-grade heating wires for comfortable, even infrared warmth, with independent upper, middle and lower temperature zones on the controller.
-
Crystal stone mattress: 12 photon lamps, full-body negative ion coverage, a natural crystal stone layer, and a PU leather finish.
-
Low EMF design: Built to keep electromagnetic field and electric field exposure low.
-
Furniture-grade build: Solid pine wood frame, reinforced curved architecture, and solvent-free PU leather.
-
Daily wellness ritual: A spa-like way to relax, recover, and unwind at home.
-
General wellness use: Not intended to diagnose, treat, cure, or prevent any disease. Not evaluated by the FDA.
1,120 Lamps Inside the KoreLight KorePOD Full Body Light Therapy Pod
Light sits at the heart of the KorePOD. You are surrounded by 1,120 high-output light lamps, and each lamp holds three LEDs for wide coverage and a truly immersive session from head to toe.
-
224 lamps: 850nm near-infrared, three chips each, invisible to the eye yet part of the full experience
-
896 lamps: combination 660nm red light and 850nm near-infrared in a 660nm:850nm ratio of 1:2, giving visible red light exposure throughout the body
Many imported systems cut costs with cheaper LED parts. Kore chose upgraded Epistar LED chips instead, because consistency matters when you invest in a premium system:
- Superior stability
- Greater consistency
- Longer operational lifespan
- Improved reliability
- More uniform light delivery
Negative Ions and Low EMF Design Inside the KoreLight KorePOD PEMF Pod
Most wellness systems stick to one modality. The KorePOD layers several into a single session, so you never have to choose between light therapy, PEMF, infrared heat, negative ions, or crystal stone relaxation.
-
Pulsed Electromagnetic Field (PEMF): creates gentle pulsed electromagnetic fields at 1-30Hz, designed to support overall wellness and relaxation
-
Negative ion environment: integrated negative ion balls create a spa-like atmosphere inside the chamber
-
Energy stone: features black negative ion balls and black crystal
-
Light plus heat: PEMF pairs with red light, near-infrared light, and infrared warmth to complement an active, healthy lifestyle
Kore also built the pod around a low EMF design philosophy, focused on keeping electromagnetic field intensity and electric field exposure low while still delivering a premium session. It is a thoughtful detail that keeps the chamber feeling calm and relaxing.
Crystal Stone Mattress With Carbon Fiber Infrared Warmth
The mattress is far more than a place to lie down. It brings light, ions, stone, and heat right up against your body.
-
12 dedicated photon lamps built into the mattress
- Full-body negative ion coverage
-
Natural crystal stone layer for comfort and a luxury feel
-
Supportive comfort design finished in premium PU leather
-
Layered construction: antiflaming PU leather with photon lamps, natural gemstones, fireproof cotton, an over-heating protector layer, low EMF carbon fiber infrared heating wire, a temperature sensor layer, a second fireproof cotton layer, and waterproof anti-corrosion PVC leather
Underneath, high-grade carbon fiber heating wires deliver comfortable infrared warmth. A controller lets you set independent upper, middle and lower temperature zones. Cheaper pods often rely on inexpensive heating that can run unevenly and wear out sooner. Carbon fiber was chosen for:
- Consistent heating performance
- Energy-conscious operation
- Long-term durability
- Reliable operation
- Comfortable, even heat distribution
Furniture-Grade Construction in the KoreLight KorePOD Red Light Pod
Plenty of lower-cost chambers use composite wood or plywood to save on manufacturing. The KorePOD takes the opposite route, so your investment holds up for years.
- Solid pine wood frame
- Reinforced curved architecture
- Furniture-grade craftsmanship
- Environmentally friendly, solvent-free PU leather
- Long-term structural stability
The result looks as good in your home as it feels during every session.
Common Questions About the KorePOD
What technologies does the KorePOD combine?
Advanced red light, near-infrared light, PEMF, infrared heat therapy, a negative ion environment, a crystal stone mattress system, low EMF design, and furniture-grade construction, all in one chamber.
How many lamps does it have?
1,120 high-output lamps with three LEDs each: 224 lamps at 850nm near-infrared and 896 lamps combining 660nm red light with 850nm near-infrared in a 1:2 ratio. The mattress adds 12 dedicated photon lamps.
Which LED chips are used?
Upgraded Epistar LED chips, chosen for stability, consistency, lifespan, and uniform light delivery.
How is the heat produced?
Through high-grade carbon fiber heating wires that provide comfortable, consistent warmth, controlled across independent upper, middle and lower temperature zones.
What is the frame made of?
A solid pine wood frame with reinforced curved architecture, finished in solvent-free PU leather.
Who is the KorePOD for?
Anyone focused on recovery, relaxation, healthy aging, performance, or building a daily wellness ritual at home.
Is the KorePOD a medical device?
No. It is intended for general wellness purposes only. These statements have not been evaluated by the Food and Drug Administration, and the product is not intended to diagnose, treat, cure, or prevent any disease. Individual results may vary, and this content is not a substitute for professional medical advice.
Have more questions?
Contact Us for help with your order.
Product Specs
| Spec |
Value |
| Brand |
KoreLight |
| Total Light Lamps |
1,120 high-output lamps, three LEDs per lamp |
| Near-Infrared Lamps |
224 lamps, 3 chips, 850nm |
| Combination Lamps |
896 lamps, 660nm red light and 850nm near-infrared (660nm:850nm=1:2) |
| LED Chips |
Upgraded Epistar LED |
| Mattress Photon Lamps |
12 |
| Additional Technologies |
PEMF, infrared heat, negative ions |
| PEMF Function |
1-30Hz |
| Heating Element |
High-grade carbon fiber heating wires |
| Controller |
Independent upper, middle and lower temperature zones |
| Energy Stone |
Black negative ion ball and black crystal |
| Mattress |
Natural crystal stone layer, full-body negative ion coverage, PU leather finish |
| Mattress Layers |
Antiflaming PU leather with photon lamps, natural gemstones, fireproof cotton, over-heating protector layer, low EMF carbon fiber infrared heating wire, temperature sensor layer, fireproof cotton, waterproof anti-corrosion PVC leather |
| Frame |
Solid pine wood, reinforced curved architecture |
| Upholstery |
Environmentally friendly, solvent-free PU leather |
| EMF Design |
Low EMF and low electric field design |
