RevitalCore Ascend M4 Full-Body Light Bed 21,600 LED Five-Wavelength

RevitalCore Ascend M4 Full-Body Red Light Therapy Bed

The RevitalCore Ascend M4 is a full-body red light therapy bed with 21,600 LEDs and five wavelengths. Tired of holding a small panel against one body part at a time, session after session? Lie down, close the cover, and let 21,600 LEDs wrap your entire body in light at once. Five wavelengths, adjustable intensity from 1 to 100%, pulsed or continuous output, and your own playlist streaming through Bluetooth surround sound. Sessions run 1 to 30 minutes, and the quiet, space-conscious build means it belongs just as comfortably in a home wellness room as in a busy studio.

• Full-Body Coverage: 21,600 LEDs bathe the entire body at once, no repositioning between areas.
• Five Wavelengths: 450nm, 525nm, 633nm, 810nm and 940nm, each independently controlled for a custom program.
• Adjustable Intensity: Output tunable from 1 to 100% to match sensitivity and routine.
• Flexible Modes: Continuous or pulsed light, with pulse frequency adjustable from 1 to 10,000Hz.
• Session Timer: Set anywhere from 1 to 30 minutes right from the touchscreen.
• Simple Controls: Integrated LCD touchscreen manages time, wavelength, intensity and pulse settings.
• Built-In Audio: Bluetooth surround sound streams music or podcasts during each session.
• Reliable Light Delivery: UK Lucite® acrylic surface passes up to 99% of light through to the body.
• Long-Lasting LEDs: EPISTAR® chips rated for up to 100,000 hours of consistent output.
• Steady Cooling: Four integrated fans and a wide-board heat design keep temperatures stable session after session.
• Easy Access: Adjustable base height accommodates different users and installation spaces.
• User Capacity: Supports users up to 330lbs / 150Kgs.
• Certified Quality: CE and RoHS certified, and FDA registered.
• Versatile Placement: Suited for home wellness rooms, professional clinics and commercial studios alike.
• Made to Order: Each bed is built specifically for your order, with production and delivery typically taking 1 to 3 months.
• Quote Required: Shipping and installation are calculated separately and provided by email after checkout.

Five Wavelengths in One Full-Body System

Most light devices give you one or two wavelengths and ask you to buy another unit for the rest. This bed carries five, side by side in the same array:

• 450nm blue
• 525nm green
• 633nm red
• 810nm near-infrared
• 940nm near-infrared

Each one is independently controlled, so you switch a wavelength on, dial another down, and build a program that suits the person on the bed rather than a fixed factory preset. Running a studio? That means one machine covering a wide range of client protocols instead of a room full of single-purpose equipment.

Dial In Every Session on the RevitalCore Ascend M4 Full-Body Light Bed

The integrated LCD touchscreen puts every setting within thumb's reach, no manual required:

• Session time from 1 to 30 minutes
• Intensity anywhere from 1 to 100%
• Continuous or pulsed operation
• Pulse frequency across a huge 1 to 10,000Hz range
• Wavelength selection, one by one

Start gentle and build up as your tolerance grows, or save the higher-output settings for experienced users. Nothing is locked behind a service call.

Light Delivery Engineered for Consistency

Output only matters if it actually reaches you. That's why the surface is UK Lucite® acrylic with up to 99% light transmittance, so almost nothing is lost between the diodes and your skin. Behind it sit EPISTAR® LED chips in a high-density array, chosen for steady output rather than a bright first month and a slow fade afterward.

A constant-current power system keeps the LEDs fed evenly across the full 2,500W LED load, and the diodes are rated for up to 100,000 hours. Run it daily and you're looking at years of service before lifespan even enters the conversation.

Quiet Cooling That Keeps Temperatures in Check

Three thousand watts of total system power generates real heat. The bed handles it with a wide-board heat-dissipation design paired with four integrated cooling fans, pulling warmth away from the LED array so output stays stable from the first minute to the last. The result is comfortable sessions and hardware that isn't cooking itself between clients.

Comfort, Sound and Access Built Around the User

Lying down beats standing still. The horizontal bed format delivers full-body coverage in a relaxed position, supporting users up to 330lbs / 150Kgs. Bluetooth surround sound is built in, so music or a podcast plays straight from a phone and a 20-minute session stops feeling like a chore.

The base height is adjustable, which helps in two ways. Clients with limited mobility get an easier step-in, and you get room to work around uneven floors, low ceilings or tight installation spaces.

Planning for Commercial Use

Every facility is different. Session pricing, client volume, staffing, and operating costs all vary, so we don't publish revenue or payback estimates. If you're adding this equipment to a clinic, studio, spa, or gym, call us at (855) 975-6272 and we'll help you plan space, power, installation, and support.

Where the RevitalCore Ascend M4 Therapy Bed Fits Best

At 76"L × 34"W × 32"H and 130 kg (287 lbs), this is a serious piece of equipment with a footprint that still works in a dedicated room at home. It runs on 220V and is certified CE and RoHS, and is FDA registered. Intended environments cover home, professional and commercial use, so the same unit suits a private wellness space, a clinic floor or a studio treatment room.

Built to Order, Just for You

Every unit is made to order. Nothing sits in a warehouse waiting for a buyer. Once your order is placed, your bed is assembled and tested specifically for you, which is exactly why the LED array, acrylic surface and control system arrive in the condition they should. Production and delivery on equipment this size typically takes 1 to 3 months, and you'll know your timeline upfront.

Shipping and installation are quoted separately and are not calculated at checkout. Select Get More Info to request a complete quotation. Once we confirm your delivery destination and any installation requirements, we'll email you the equipment total, shipping costs and any requested installation charges.

Frequently Asked Questions

Product Specs