Plunge on Your Schedule With the Titan Atlas Cold Plunge
Hauling bags of ice every single morning gets old fast, and a rock-hard plastic bucket punishes your back before the cold ever does. You want a plunge that is ready when you are, sits at a true 37°F without a single cube, and still packs down when you move house. That is exactly the job this barrel-style tub and chiller bundle was built for: 4" military-grade drop-stitch PVC, a built-in seat for upright plunging, clip-on steps, and a chiller you can size to your climate. Setup takes about 20 minutes. Then you just climb in.
-
True cold, no ice: chiller-equipped configurations hold a steady 37°F (3°C), while the No Chiller option runs the traditional way with ice.
-
Chiller sizing: choose 1/3 HP (up to 85°F climates), 1/2 HP (above 85°F), or 1 HP Pro+ (above 100°F, adds 3100W heating), each on a standard 110V outlet.
-
Filtration by generation: Gen IV uses standard 20-micron filtration with an external pump, while All-in-One Gen V adds 3-stage sediment plus 20-micron plus UV sanitation with dual internal pumps.
-
App control: All-in-One Gen V includes WiFi app control with scheduling, Gen IV is controlled at the unit.
-
Comfort seat: built-in seat lets you plunge upright instead of curling into a ball, sized for users up to 7'2".
-
Rugged build: 4 in military-grade drop-stitch PVC walls, weather and UV resistant, free from BPA and phthalates.
-
Fast setup: built-in water ports and quick-connect hoses get you running in about 15 to 20 minutes.
-
Insulated cover: 8.5 in thick drop-stitch lid with buckle seal locks in temperature between sessions.
-
Safe entry: buckle-on anti-slip steps and included phone holder for timers or playlists.
-
Low upkeep: washable mesh fan filter protects the compressor from dust, hair and debris.
-
Running cost: roughly $0.50 to $1.50 per day depending on model.
-
Full kit included: cover, air pump, drain valves, steps, repair kit, hoses, filters and power cable all ship in the box.
-
Daily routine: a cold plunge that is ready whenever your post-training or morning routine is.
-
Warranty: 2-year nationwide coverage, extendable to 5 years.
-
Returns: 30-day return window with U.S.-based phone support behind every order.
-
Color choice: available in Midnight Black or Arctic White.
Variant comparison
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| SKU |
TITGENI13HP |
TITGENI13HP-2 |
TITGENI12HP |
TITGENI12HP-2 |
TITGENI1HPP |
TITGENI1HPP-2 |
TITGENINOCH |
TITGENINOCH-2 |
10011 |
10012 |
TITALLI12HP |
TITALLI12HP-2 |
TITALLI1HPP |
TITALLI1HPP-2 |
| Control & Features |
Gen IV · standard 20μm filter · external pump · No app |
Gen IV · standard 20μm filter · external pump · No app |
Gen IV · standard 20μm filter · external pump · No app |
Gen IV · standard 20μm filter · external pump · No app |
Gen IV · standard 20μm filter · external pump · No app |
Gen IV · standard 20μm filter · external pump · No app |
Gen IV · standard 20μm filter · external pump · No app |
Gen IV · standard 20μm filter · external pump · No app |
All‑in‑One Gen V · advanced 3‑stage filtration · UV sanitation · App control · dual‑pump |
All‑in‑One Gen V · advanced 3‑stage filtration · UV sanitation · App control · dual‑pump |
All‑in‑One Gen V · advanced 3‑stage filtration · UV sanitation · App control · dual‑pump |
All‑in‑One Gen V · advanced 3‑stage filtration · UV sanitation · App control · dual‑pump |
All‑in‑One Gen V · advanced 3‑stage filtration · UV sanitation · App control · dual‑pump |
All‑in‑One Gen V · advanced 3‑stage filtration · UV sanitation · App control · dual‑pump |
| Chiller Power / Climate |
1/3HP · 815W · for climates up to 85°F |
1/3HP · 815W · for climates up to 85°F |
1/2HP · 1141W · for climates above 85°F |
1/2HP · 1141W · for climates above 85°F |
1HP · 2600W · for climates above 100°F |
1HP · 2600W · for climates above 100°F |
No Chiller · use ice |
No Chiller · use ice |
1/3HP · 815W · for climates up to 85°F |
1/3HP · 815W · for climates up to 85°F |
1/2HP · 1141W · for climates above 85°F |
1/2HP · 1141W · for climates above 85°F |
1HP · 2600W · for climates above 100°F |
1HP · 2600W · for climates above 100°F |
| Cooling Speed & Capacity |
Cools to 37°F · ~4–6 hr/100 gal |
Cools to 37°F · ~4–6 hr/100 gal |
Cools to 37°F · ~2–4 hr/100 gal |
Cools to 37°F · ~2–4 hr/100 gal |
Cools to 37°F · ~1–2 hr/100 gal |
Cools to 37°F · ~1–2 hr/100 gal |
N/A · no active cooling |
N/A · no active cooling |
Cools to 37°F · ~4–6 hr/100 gal |
Cools to 37°F · ~4–6 hr/100 gal |
Cools to 37°F · ~2–4 hr/100 gal |
Cools to 37°F · ~2–4 hr/100 gal |
Cools to 37°F · ~1–2 hr/100 gal |
Cools to 37°F · ~1–2 hr/100 gal |
| Price |
$1397.00 |
$1397.00 |
$1788.00 |
$1788.00 |
$2089.00 |
$2089.00 |
$899.00 |
$899.00 |
$1576.00 |
$1576.00 |
$2027.00 |
$2027.00 |
$2438.00 |
$2438.00 |
| Finish (Color) |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Midnight Black |
Arctic White |
Chiller Power Matched to Your Climate in the Titan Atlas Cold Plunge Tub
Every chiller in the range pulls water down to 37°F (3°C). What changes is how fast it gets there and how confidently it holds that number when the air around it is baking. Pick by your weather, not by guesswork:
-
1/3 HP Standard Chiller: 815W cooling capacity, best for climates up to 85°F, roughly 4 to 6 hours per 100 gallons. Input power 330W, 4A, 44 lbs (20 kg), 17 × 12 × 14 in (43.2 × 30.5 × 35.6 cm).
-
1/2 HP Pro Chiller: 1141W, built for climates above 85°F, roughly 2 to 4 hours per 100 gallons. Input power 520W, 6A, 52 lbs (23.6 kg), 17 × 14 × 14 in (43.2 × 35.6 × 35.6 cm).
-
1 HP Pro+ Chiller: 2600W for climates above 100°F, roughly 1 to 2 hours per 100 gallons, plus 3100W heating capacity. Input power 750W, 8.5A, 64 lbs (29 kg), 19 × 15 × 21 in (48.3 × 38.1 × 53.3 cm), and it rolls on wheels.
-
No Chiller: tub only, cooled with ice the traditional way.
All three run on a standard 110V US outlet, so there is no special wiring and no electrician. Hoses measure 65in (165cm) and the units suit indoor or outdoor placement, ideally somewhere covered or shaded and out of direct sun. Noise sits around 40 to 45 dB on the 1/3 HP (about the same as a fridge), ~50 to 55 dB on the 1/2 HP and ~50 to 60 dB on the 1 HP, measured at roughly 3ft. Vibration pads and a little distance from seating areas quiet things further.
Water You Actually Want to Sit In
Cloudy, sour water is what kills most home plunge habits. Filtration here depends on which generation you choose:
-
Gen IV: standard 20-micron filtration with an external pump and filter unit.
-
All‑in‑One Gen V: advanced 3-stage filtration pairing a sediment filter, the 20-micron filter and built-in UV sanitation, driven by dual internal pumps for continuous 24/7 circulation.
The Gen V twist-lock cap makes filter swaps a few-second job instead of a plumbing project, and constant circulation means the water never sits stagnant between sessions. Keep filters clean or replaced and sanitation levels topped up, and maintenance stays close to nothing.
Run Your Plunge From Your Phone
Choose the All‑in‑One Gen V and built-in WiFi hands you the whole system from wherever you are. Adjust the temperature, switch the unit on or off, and build schedules so the water hits your target before your alarm does. Gen IV skips app functionality and is controlled at the unit.
The practical win is timing. Set a schedule, walk out of the gym, and the plunge is already cold when you get home instead of starting its cooldown the moment you remember it.
Why the Titan Atlas Ice Bath Feels Better Than a Bucket
Curling into a ball in a narrow barrel makes the cold harder to tolerate. A built-in seat changes the whole experience by letting you sit upright and breathe properly through the first 30 seconds.
-
Seat dimensions: 14x31in (35.5x78.7cm)
-
Seat height: 13 in (33 cm) from the bottom, 30 in (76.2 cm) from the top
-
Spacious full-body design with 232 gallons (878 liters) of capacity
- Accommodates users up to 7′2″ tall
Upright posture supports controlled breathing, keeps your spine supported, and still lets you drop in for deep full-body immersion.
Military-Grade Walls on the Titan Atlas Barrel Ice Bath
The wall is 4 in (10 cm) thick and built from three bonded layers: an outer PVC skin, an inner PVC skin, and a nylon drop-stitch core holding them at a fixed distance under pressure. That structure is what gives an inflatable tub rigid, self-supporting sides instead of floppy ones, and the thickness doubles as insulation so the chiller cycles less.
It is weather and UV resistant, rated for indoor or outdoor use, and free from BPA, phthalates and other chemicals. Empty weight is just 35lbs (16 kg), so one person can move it. Pick Midnight Black or Arctic White to suit the space.
Integrated Water Ports and 15 Minute Hookup
Hoses draped over a tub rim are a trip hazard and a leak waiting to happen. Here the Water IN and Water OUT connectors are built into the tub wall, so the insulated hoses run flush and stay put. Connect two hoses, plug into a standard outlet, and you are running. The All‑in‑One Gen V is a plug-and-play, dual-pump system that goes together in roughly 15 minutes, while full tub setup takes about 20.
If you already own a tub, the chiller is designed with universal compatibility in mind and works with third-party or DIY setups through a fixed connector configuration for tubs with standard inlet and outlet fittings, or a drop-in circulation configuration where no fittings exist.
The Patent-Pending Lid That Keeps Cold In
Cold escapes through the surface faster than anywhere else. The inflatable insulated cover measures 8.5 inches thick with the same 4" drop-stitch PVC core as the tub and an all-around buckle seal, so your set temperature holds between sessions and leaves, dust and bugs stay out. It is light enough to carry off one-handed.
Clip-On Steps and a Phone Holder Included
Climbing into a 45-inch tub on a wet patio should not be the risky part of your morning. The included steps buckle directly to the tub so they cannot slide out from under you, and the tread surface is anti-slip. They are built from the same 4 inch drop-stitch PVC, measure 29×24×18.5 in (73.7×61×47 cm) and weigh only 6.5 lb (2.9 kg).
An adjustable phone holder clamps to the rim too, keeping your timer, breathwork track or playlist in view while you are submerged to the neck.
Dust Protection That Keeps the Compressor Breathing
Clogged airflow is a common cause of chiller problems. A patent-pending washable mesh fan filter sits over the intake and catches dust, hair and debris before it reaches the fan and coils. Rinse it, dry it, click it back in. That is the whole maintenance routine, and it protects the cooling performance you paid for over years rather than months.
Running Costs Compared to Ice
The chiller uses standard refrigeration technology, similar to a home fridge or freezer, and cycles on only when cooling is needed rather than running flat out. Typical daily figures, based on usual U.S. electricity rates at around 77°F ambient with the unit set to ~46°F:
-
1/3 HP Standard: approx. 3 to 5 kWh/day, about $0.50 to $0.80 per day
-
1/2 HP Pro: approx. 5 to 7 kWh/day, about $0.70 to $1.10 per day
-
1 HP Pro+: approx. 7 to 10 kWh/day, about $1.00 to $1.50 per day
Now compare that to ice. A session typically eats 15 to 40 lbs at an average $3 per 10 lbs. Actual figures shift with climate, insulation and how often you plunge.
Everything in the Box for the Titan Wellness Atlas Cold Plunge Tub
With the tub:
- 1x inflatable insulated cover
- 1x 2-way air pump + hose
- 2x drain valves
- 1x phone holder
- 1x repair kit
- Clip-on anti-slip stairs, carrying bag and garden hose adapter
With the chiller:
- 1x water chiller
- 2x quick-connect insulated hoses with connectors and seal rings
- 1x 20-micron water filter and pump unit
- 1x sediment water filter and 1x fan dust filter
- 1x GFCI power cable (US 110V plug)
- 1x detailed instruction manual
Why People Make Cold Plunging a Habit
Cold water immersion is a popular part of many athletes' and wellness routines. People like it for:
-
A post-training ritual after hard sessions
-
A brisk, refreshing start to the morning
-
Time away from screens to focus on your breathing
-
Consistency, because a tub at home removes the excuses
This is a wellness routine, not a treatment. Talk with your doctor before starting cold immersion, especially if you have a heart condition or high blood pressure.
New to it? Start around 55 to 60°F and limit yourself to about a minute, then stretch the duration before you drop the temperature. Many people settle on sessions between 2 and 10 minutes once they have adapted, and full-body immersion feels very different from a cold shower.
Warranty, Returns and Support
Every bundle carries a 2-year nationwide warranty covering all 50 states, with an optional 5-year extension available. You also get a 30-day return window: if the plunge is not for you, send it back in new condition, free of scratches or dents, in its original packaging with all parts included, and expect your refund within 3 to 7 business days once it reaches the warehouse. Return shipping costs apply and restrictions apply.
Lifetime U.S.-based phone support stands behind it, so there is a real person to call when you have a question about your setup. Contact Us for those arrangements or for expedited options. 0% APR financing over 12 months is available, with 36-month terms for longer payment plans, and the system is HSA/FSA eligible.
Product Specs
| Spec |
Value |
| Tub Dimensions |
38.5×38.5×45 in (97.8×97.8×114.3 cm) |
| Wall Thickness |
4 in (10 cm) |
| Water Capacity |
232 gallons (878 liters) |
| Tub Empty Weight |
35 lbs (16 kg) |
| Seat Dimensions |
14x31in (35.5x78.7cm) |
| Seat Height |
13 in (33 cm) from bottom; 30 in (76.2 cm) from top |
| Steps Dimensions |
29×24×18.5 in (73.7×61×47 cm) |
| Steps Weight |
6.5 lb (2.9 kg) |
| Tub Material |
4" military-grade drop-stitch PVC, BPA and phthalate free |
| Maximum User Height |
Up to 7′2″ |
| Chiller Dimensions |
1/3 HP: 17x12x14in (43.2x30.5x35.6cm) / 1/2 HP: 17x14x14in (43.2x35.6x35.6cm) / 1 HP: 19x15x21in (48.3x38.1x53.3cm) |
| Chiller Weight |
1/3 HP: 44lbs (20kg) / 1/2 HP: 52lbs (23.6kg) / 1 HP: 64lbs (29kg) |
| Cooling Capacity |
1/3 HP: 815W / 1/2 HP: 1141W / 1 HP: 2600W |
| Heating Capacity |
1 HP Chiller only: 3100W |
| Input Power |
1/3 HP: 330W / 1/2 HP: 520W / 1 HP: 750W |
| Current Draw |
1/3 HP: 4A / 1/2 HP: 6A / 1 HP: 8.5A |
| Minimum Water Temperature |
37°F (3°C) |
| Cooling Time |
1/3 HP: 4-6 hours per 100 gal / 1/2 HP: 2-4 hours per 100 gal / 1 HP: 1-2 hours per 100 gal |
| Recommended Climate |
1/3 HP: below 85°F / 1/2 HP: above 85°F / 1 HP: above 100°F |
| Power Supply |
Standard 110V US outlet, GFCI power cable |
| Hose Length |
65in (165cm) |
| Noise Level (at ~3ft) |
1/3 HP: 40-45 dB / 1/2 HP: ~50-55 dB / 1 HP: ~50-60 dB |
| Filtration |
Gen IV: standard 20-micron with external pump / All‑in‑One Gen V: 3-stage sediment + 20-micron + UV sanitation with dual pumps |
| App Control |
Gen IV: no app / All‑in‑One Gen V: built-in WiFi app control and scheduling |
| Color Options |
Midnight Black or Arctic White |
| Placement |
Indoor and outdoor, covered or shaded area recommended |
| Estimated Running Cost |
Approximately $0.50 to $1.50 per day depending on model and conditions |
| Warranty |
2-year nationwide, extendable to 5 years |
| Returns |
30 days |