MedEq Cold & Hot Plunge Pool – Wood & 304 Stainless Steel Tub with 1 HP Chiller/Heater
The MedEq Fitness Cold & Hot Plunge Pool by Gurgle is a dual-mode cold plunge tub and hot soak in one unit. A 1 HP chiller/heater holds water anywhere from 37°F to 108°F (3°C–42°C), so the same tub works as an ice bath, a heated soaking tub, or a contrast therapy station. The 304 stainless steel interior is wrapped in natural wood paneling, with built-in ozone sterilization, water filtration, and touchscreen control. It is built for athletes, gyms, recovery studios, and home wellness rooms.
Quick Specs
| Temperature range |
37°F – 108°F (3°C – 42°C) |
| Chiller/heater |
1 HP, 2450W cooling, 3800W heating |
| Tub construction |
304 stainless steel interior, wood exterior |
| External size |
75 in x 31 in x 30 in |
| Water care |
Ozone sterilization plus water filtration |
| Power |
220–240V, 60Hz |
| Warranty |
1 year on tub, chiller/heater, and electronics |
Cold Plunge and Hot Soak in One Tub
Most cold plunge tubs only chill. This system cools and heats, so one footprint covers both sides of contrast therapy. Set it near 37°F for a cold water immersion session after training, or raise it to as high as 108°F for a heated soak. With 2450W of cooling capacity and 3800W of heating capacity, the 1 HP unit is sized to hold a set temperature through repeated daily use.
Key Features
-
Dual-mode temperature control: Switch between cold plunge and heated soak for contrast therapy, from 37°F to 108°F.
-
304 stainless steel interior: Corrosion-resistant, non-porous, and easy to wipe down between users.
-
Natural wood exterior: Wood paneling gives the tub a spa finish that suits a home wellness room or a client-facing recovery studio.
-
Insulated tub body: A stainless steel belt with integrated thermal insulation helps hold the set temperature.
-
Touchscreen control panel: LCD touch display for real-time water temperature and mode selection.
-
Remote and app control: Adjust temperature from the remote or from your phone over Wi-Fi.
-
Ozone sterilization and filtration: Built-in ozone and a replaceable filter keep water clean between sessions.
-
IPX4 water-resistant electronics: Rated for splashing water in wet, humid rooms.
-
Cover and extra filters included: Ships with an insulated cover and spare filters.
Touchscreen, Remote, and Wi-Fi App Control
Set the water temperature and switch between cooling and heating from the LCD touch panel on the tub, the included remote, or the phone app. The display shows the current water temperature in real time, so staff or household members can confirm the tub is ready before stepping in.
Ozone Sterilization and Water Filtration
Water runs through a 20 micron filter and an ozone sterilization system, which reduces how often the tub needs to be drained and refilled. The filter sits under a top-access lid, so it can be rinsed or swapped in a minute. Extra filters are included in the box.
Who This Cold & Hot Plunge Is For
-
Gyms and fitness centers: Add a recovery amenity or paid add-on without building a wet room.
-
Recovery studios, chiropractors, and physical therapy clinics: Offer cold plunge, hot soak, and contrast sessions from one tub.
-
Med spas and wellness centers: The wood finish fits a spa setting.
-
Sports teams and training facilities: Stainless steel interior and ozone sanitation suit back-to-back athlete use.
-
Home users: A permanent ice bath and hot tub replacement with no bags of ice.
Full Specifications
| Tub Unit |
| Materials |
304 stainless steel inner chamber, wooden outer shell |
| Insulation |
Stainless steel belt with integrated thermal insulation |
| External size |
75 in x 31 in x 30 in |
| Weight |
379 lb |
| Packaging size and weight |
79 in x 35 in x 36 in, 507 lb |
| Included accessories |
Cover, extra filters |
| Chiller/Heater Unit |
| Horsepower |
1 HP |
| Cooling capacity |
2450W |
| Heating capacity |
3800W |
| Temperature range |
3°C – 42°C (37°F – 108°F) |
| Power supply |
220–240V, 60Hz |
| Input power |
1060W |
| Compressor power |
900W |
| Chiller size |
620 x 424 x 556 mm (24.4 x 16.7 x 21.9 in) |
| Chiller weight |
35 kg (77 lb) |
| Water resistance |
IPX4 |
| Hose connections |
2 reinforced water hoses |
| Functions |
Cooling, heating, ozone sterilization, water filtration, remote control operation |
Planning for Commercial Use
Every facility is different. Session pricing, client volume, staffing, and operating costs all vary, so we don't publish revenue or payback estimates. If you're adding this equipment to a clinic, studio, spa, or gym, call us at (855) 975-6272 and we'll help you plan space, power, installation, and support.
Maintenance Schedule
-
Daily: Check the water level and rinse the filter after use.
-
Weekly: Clean the tub interior, check hose connections, and test temperature calibration.
-
Monthly: Service the chiller unit and inspect the ozone and filter system.
Warranty
-
Stainless steel tub and wood frame: 1 year
-
Chiller/heater unit: 1 year
-
Electronics and control panel: 1 year
Frequently Asked Questions
| Question |
Answer |
| How cold and how hot does the MedEq plunge pool get? |
The chiller/heater holds water from 37°F to 108°F (3°C to 42°C). |
| Can I use it for contrast therapy? |
Yes. The same unit cools and heats, so you can run it as a cold plunge, a hot soak, or alternate between the two. Changing the water temperature takes time, so facilities that want back-to-back hot and cold often pair it with a sauna or a second tub. |
| Do I need to add ice? |
No. The 1 HP chiller cools the water to as low as 37°F without ice. |
| What power does it need? |
220–240V, 60Hz. It does not run on a standard 120V household outlet, so have a licensed electrician confirm or install a suitable circuit before delivery. |
| How big is the tub? |
The exterior measures 75 in long x 31 in wide x 30 in high, and the tub weighs 379 lb empty. |
| How is the water kept clean? |
Built-in ozone sterilization and a 20 micron filter treat the water as it circulates. Rinse the filter daily and replace it as needed. Extra filters are included. |
| Can it be used in a commercial facility? |
Yes. The 304 stainless steel interior, ozone and filtration system, and IPX4-rated electronics are suited to gyms, recovery studios, clinics, and spas. |
| Can it be installed outdoors? |
The electronics are IPX4 rated, which covers splashing water. A covered, sheltered location is recommended to protect the wood exterior and the chiller. |
| What is included? |
The wood and stainless steel tub, the 1 HP chiller/heater, two reinforced water hoses, remote control, a cover, and extra filters. |
| What is the warranty? |
1 year on the stainless steel tub and wood frame, 1 year on the chiller/heater unit, and 1 year on the electronics and control panel. |
MedEq Fitness Cold & Hot Plunge Pool: one tub for ice baths, heated soaks, and contrast therapy at home or in your facility.
Cold and hot water immersion are not suitable for everyone. Consult your physician before use if you are pregnant or have a heart, circulatory, or other medical condition.
