AMBOHR Ultra Chiller Cold Plunge Chiller 1HP Cooling and Heating

Most people buy a chiller and then wish they could warm the water back up. This 1HP unit does both, so your tub works year round instead of sitting empty in winter.

• 3kW cooling capacity pulls water down to a true cold plunge temperature
• 4kW heating capacity turns the same tub into a warm soak
• Full range of 34℉ to 104℉ at your command
• Cools 200L of water from 68°F to 34°F within a few hours

That speed matters when you train on a schedule: your plunge is ready when you are, without watching ice melt mid session.

Built-in smart control connects the unit to your device, so you can adjust water temperature remotely and have the plunge ready the moment you walk in from a run or a lift.

The front panel keeps everything within reach across five touch buttons:

• LED display showing current water temperature, with snowflake and WiFi icons alongside the reading (shown at 38°F in the panel close-up)
• Fahrenheit and Celsius switch for the readout you prefer
• Bathtub light switch
• WIFI connection for remote pairing
• Set water temp and start/stop touch buttons
• Key lock so a stray hand can't change your setting

Still water collects debris fast. A dual filtration system intercepts impurities as the chiller circulates your tub, keeping the water clear between fills instead of forcing a drain and refill every few days.

Servicing it takes minutes. The cap unthreads from the housing, the pleated cartridge lifts straight out, and the included filter wrench handles a tight fitting. You also get 3 replacement filter cartridges and a rubber ring in the box, so you're stocked from day one.

Running below 55dB, the chiller stays quiet enough for a garage, a bedroom-adjacent bathroom, or a patio at six in the morning. No roar, no neighbors wondering what you're doing.

The housing is heavy-duty, ultra-durable, weatherproof material with an IPX5 waterproof rating, and it holds stable performance in ambient conditions from 34°F to 104°F. An air vent grille and cooling holes let the unit breathe while it runs. Threaded water connection fittings and a recessed drain port sit at the rear, with a built-in handle above for repositioning.

A note on longevity: keep the unit out of direct rainfall and intense sunlight where you can. That protects the internal components from premature aging. Cleaning is nothing more than a wipe with a damp cloth, avoiding heavy water exposure near the electronics.

Assembly runs about 5 to 7 minutes. Connect the chiller to your filled tub, plug it into a standard outlet, and let it circulate. It works with an acrylic tub kit or an inflatable tub kit alike, and the video tutorial is reachable by scanning the QR code in the instruction manual.

Before first use: place the product on a flat surface and let it sit undisturbed for 24 hours before turning it on.

Everything you need arrives together:

• 1 x Durable AMBOHR Cold Plunge Chiller
• 1 x AMBOHR Drainage System for effortless water removal and quick cleaning
• 1 x AMBOHR Filtering System
• 1 x Power Cord
• 3 x Replace Filter Cartridge
• 1 x AMBOHR Chiller Filter Wrench
• Rubber ring
• 1 x AMBOHR Instruction Manual

Count what ice actually costs you. Bags every session, trips to the store, water that warms up halfway through because the ice already melted. The chiller holds 34°F on its own and keeps it there for the whole session.

Over months of regular plunging, those savings add up, plus you get the consistency ice never gave you.

Your order also carries a 1-Year warranty, free shipping, factory direct shipping from CA or Texas, and 24/7 customer support.

Regular cold immersion is a routine, not a one-off stunt. With the water already at temperature, the routine actually sticks.

• Ready when you are: the water holds your set temperature between sessions, with no ice to buy
• Start gradually: begin warmer and shorter, then work down over time
• Year-round use for both cold plunges and warm soaks

This information is for general education and isn't medical advice. If you have a medical condition, are pregnant, or take medication, talk with your doctor before starting cold water immersion.

How cold does it actually get?
Down to 34°F, a true ice bath temperature with no ice required. The unit then holds that temperature steady through your session.

Can I use it indoors and outdoors?
Yes. The weatherproof housing and IPX5 rating suit a home, gym, backyard, or patio. Limit exposure to direct rain and harsh sun to protect the internal components.

How long does setup take?
Roughly 5 to 7 minutes. Connect the tub and chiller following the video tutorial, then plug in. Remember the 24 hour resting period after the package arrives.

Does it heat as well as cool?
It does. 3kW cooling and 4kW heating cover the full 34℉ to 104℉ range from the same unit.

How do I clean it?
Wipe the exterior with a damp cloth and avoid excessive water around the internals. Change the filter cartridge as needed using the supplied wrench.

Is there a warranty?
Every order includes a 1-Year warranty. Contact Us if anything isn't right and we'll sort it out.