RevitalCore Ascent Rise Hyperbaric Chamber Single User Soft Shell TPU

RevitalCore Ascent Rise Soft Shell Hyperbaric Chamber

The RevitalCore Ascent Rise is a single-user soft shell hyperbaric chamber with built-in oxygen and cooling. Tired of squeezing into a cramped recovery pod where you can barely move? Stretch out instead. This extended soft-shell chamber gives you 220 cm of interior length, so you can sit upright with a book or recline flat and drift off. Choose your pressure at 1.3 or 1.4 ATA, breathe oxygen through a headset or facial mask with no tanks to refill, and stay cool thanks to built-in air cooling and dehumidification. Your chamber is built to order once you choose your ATA and voltage, so what arrives is configured for your space, your power supply, and your session style.

• Session positions: Sit upright or recline flat inside a 220 × 70 × 110 cm chamber built for comfort during longer sessions.
• Pressure options: Choose 1.3 or 1.4 ATA, approximately 30 or 40 kPa above ambient, based on your variant.
• Power options: Available in 110V, 220V, or 240V to match your outlets.
• Oxygen supply: A molecular-sieve concentrator delivers up to 93% oxygen continuously, with no tanks to buy or refill.
• Flow control: Oxygen flow adjusts from 1 to 5 LPM through a headset or facial mask.
• Pressure safety: Automatic relief valves, an emergency-release valve, and a manual air-deflation valve give you multiple ways to depressurize.
• Pressure visibility: An integrated gauge lets you monitor pressure from inside the chamber.
• Chamber build: Abrasion- and tear-resistant TPU with high-frequency welded seams and a triple-zipper closure for a secure seal.
• Comfort control: Built-in air cooling and dehumidification keep sessions comfortable rather than stuffy.
• Noise level: An integrated silencer on the air compressor keeps operation quiet for shared spaces.
• Accessories: Pair it with an adjustable folding chair for seated use or a protective outer cover in various styles.
• Certifications: Backed by CE certification and produced under ISO 9001 and ISO 13485 quality systems.
• Your build: Each chamber is made to order around your chosen ATA, voltage, and accessories, so it arrives configured specifically for your space.
• Delivery note: Made-to-order production means larger configurations can take 1 to 3 months to ship, with shipping and installation quoted separately.

Variant comparison

Room to Sit Up or Lie Back in the RevitalCore Ascent Rise Softshell HBOT

Most single-user soft chambers force you into one position. The extended footprint here changes that. At 220 × 70 × 110 cm (approximately 87" × 28" × 43"), the interior accommodates both seated and reclining sessions, so your posture is a preference rather than a limitation.

• Seated sessions pair with the optional adjustable folding chair, keeping you upright to read, work, or watch something
• Reclining sessions let you lie fully back and rest
• Single-user design keeps the pressurized volume efficient while still feeling open
• 110 cm of interior height means your head and shoulders are not pressed against the shell

That flexibility matters over a 60 or 90 minute session. Being able to shift how you sit is often the difference between finishing comfortably and cutting things short.

Pick Your Pressure Level and Power Supply

Two decisions shape your chamber, and both are made before it is built.

• Operating Pressure: 1.3 ATA or 1.4 ATA, equal to approximately 30 or 40 kPa above ambient
• Voltage: 110V, 220V, or 240V to match the outlets in your home, studio, or clinic

Once pressurized, the integrated internal pressure gauge sits where you can see it, so you always know exactly where the chamber is during a session rather than guessing or relying on someone outside.

Oxygen on Tap Without a Single Cylinder

Refilling and storing oxygen tanks is a recurring cost and a recurring hassle. The included molecular-sieve oxygen concentrator removes that entirely by producing oxygen continuously from the air in the room.

• Factory-rated concentration up to 93%
• Adjustable flow from 1 to 5 LPM, so you dial in what suits your session
• Headset or facial mask delivery, whichever you find easier to wear
• 500W concentrator measuring 35 × 10 × 65 cm (approximately 14" × 4" × 26")

No external oxygen tank is required at any point. Plug in, switch on, and the supply lasts as long as your session does.

Four Layers of Pressure Control You Can Actually Reach

Confidence inside a pressurized chamber comes from knowing how to get out. Pressure management here runs on several independent paths.

• Automatic pressure-relief valves regulate the chamber during normal operation
• Emergency-release valve supports faster depressurization when it is needed
• Manual air-deflation valve gives you an additional release option
• Integrated pressure gauge keeps the reading in front of the occupant, not outside the shell

The triple-zipper closure works alongside these, holding a secure seal through the session while still opening quickly.

TPU Construction and Welded Seams in the Soft Shell Hyperbaric Chamber

A soft chamber lives or dies by its shell. This one uses TPU with abrasion- and tear-resistant properties, chosen to handle repeated pressurization cycles and the wear that comes with daily studio or clinic use.

• High-frequency welded seams rather than stitched joins, supporting strength and long-term durability
• Triple-zipper entry distributes closure stress across three tracks
• Optional protective outer covers in different colors and coverage styles, so you can shield the shell and match your room

The whole system weighs 36 kg (approximately 79 lbs) net, keeping it manageable for a recovery room that occasionally gets rearranged.

Cool, Dry, Quiet Sessions Instead of a Stuffy Box

Heat and humidity are the two things that ruin a long session. Both are handled by dedicated components.

• Air cooling and dehumidification from a 200W air cooler measuring 18 × 12 × 35 cm (approximately 7.2" × 5" × 14")
• 72 LPM air compressor rated at 550W, sized 39 × 24 × 26 cm (approximately 16" × 10" × 10")
• Integrated silencer on the compressor to keep operating noise down
• Built-in compressed-air filter treating the air before it reaches the chamber

Quieter operation is not a luxury here. In a spa or shared gym space, a loud compressor is heard by every client in the building.

Planning for Commercial Use

Every facility is different. Session pricing, client volume, staffing, and operating costs all vary, so we don't publish revenue or payback estimates. If you're adding this equipment to a clinic, studio, spa, or gym, call us at (855) 975-6272 and we'll help you plan space, power, installation, and support.

How the RevitalCore Ascent Rise Soft Shell Hyperbaric Chamber Is Certified, Built, and Delivered

Every unit carries CE certification and is produced under ISO 9001 and ISO 13485 quality systems.

These chambers are made to order. Your ATA setting, your voltage, and your accessory choices are assembled specifically for you rather than pulled off a shelf, which is why larger configurations can take up to 1 to 3 months to ship. The upside is a chamber matched to your space from the first session instead of a compromise you have to work around.

Shipping and installation are quoted separately and are not calculated at checkout. Select Get More Info to request a full quotation. Once we confirm your delivery destination and any installation requirements, we will email you the equipment total, shipping costs, and any requested installation charges. Contact Us if you have questions about placement or power before you order.

Frequently Asked Questions

Product Specs