Revive Plunge Core .8hp Chiller with Hot and Cold Therapy

Hot and Cold Hydrotherapy at Home With the Revive Plunge Core .8hp Cold Plunge Chiller

Tired of hauling bags of ice to your tub every single morning? Dial in your plunge instead. This .8hp chiller drives water down to a bracing 35°F or warms it up to a soothing 107°F, so your recovery routine runs on a schedule you set from your phone. Clean water, quiet operation, and a setup that takes minutes thanks to the included quick-connect hoses. Your cold plunge, ready when you are.

• Dual Temperature: Cools to 35°F or heats to 107°F for full hydrotherapy contrast.
• Quiet Motor: .8hp motor delivers fast cooling with minimal noise, with a large circular cooling fan behind a black grille on the end of the unit.
• Clean Water: Two-phase filtration with a 20-micron cartridge and washable metal mesh pre-filter, plus a built-in ozone generator.
• Remote Access: Wi-Fi app control for temperature adjustments and scheduling from anywhere.
• Onboard Controls: Black glass control panel on top with a circular digital screen and touch buttons for direct adjustments at the tub.
• Easy Setup: Two black quick-connect hoses included, no extra equipment needed.
• Portable Build: Carry handle, rubber feet and a black vented side grille in a compact housing.
• Low Upkeep: Clean filters every 4 to 6 weeks and drain the unit once a year.
• Warranty: 1 year coverage included, with optional 2 or 3 year protection plans available.
• Shipping: Free within the US, with in-stock orders shipped in 1 to 2 business days.
• Savings: HSA/FSA eligible, saving buyers an average of 30%.

Cold Plunges and Hot Soaks From One Machine

Two therapies, one unit. The dual temperature capability means you never have to choose between contrast therapy and a single-temperature setup.

• Cold as low as 35°F for post-training recovery and mental focus work
• Heat up to 107°F when you want a warm soak instead of a shock
• Ultra-fast cooling pulls your water down quickly and holds it there
• Run contrast sessions by switching between hot and cold in the same tub

The .8hp motor does the work quietly, drawing air through the black vented side grille and out past the large circular cooling fan, so early sessions won't wake the house or bother the neighbors.

Two-Phase Filtration and Ozone Keep the Water Clear in the Revive Core .8hp Chiller

Nobody wants to lower themselves into cloudy water. Two stages of filtration plus ozone sanitation handle what your body leaves behind.

• Washable metal mesh pre-filter catches hair, leaves and larger debris before they reach the system
• Built-in 20-micron cartridge filter traps the fine particles the mesh misses, and it's replaceable when the time comes
• Built-in ozone generator attacks bacteria and other microorganisms in the water itself

The cylindrical filter housing sits on the back panel alongside the rating and spec label, the QR code sticker and the breaker switch, so service points are all in one place. Plan on cleaning both filters every 4 to 6 weeks depending on how often you plunge, and draining and cleaning the chiller at least once a year. Before your very first session, add Sirona Spa Care Oxidizer to the tub and run the chiller for 10 to 15 minutes to sanitize the system.

Set the Temperature From the Couch With the Revive Core .8 HP Cold Plunge Chiller

Wi-Fi app connectivity puts the whole thing in your pocket. The Revive Cold Plunge app is available on both Google Play and the App Store, and its home screen shows your live water temperature alongside a temperature slider, flow rate and timing controls. Open the app from anywhere with a stable internet connection and your water is already waiting at the temperature you picked.

• Remote temperature control from your smartphone, at home or on the drive back from the gym
• Schedule programming so the water is cold at 6 a.m. without you lifting a finger
• Customize your session to match your training block or the time of year

Onboard Digital Screen on the Revive Plunge .8hp Chiller

No phone nearby? Not a problem. A black glass control panel sits right on top of the unit, carrying the Revive logo, a circular digital screen area and touch buttons, including up and down arrows, a mode button and a power button, with the chrome handle running along the edge. Walk up, check your current water temperature, make an adjustment, and get in. It's the fastest route to a change when you're already standing at the tub.

Hook Up the Revive Plunge Core Chiller in Minutes

Two black quick-connect hoses come in the box, so there's no trip to the hardware store and no extra equipment to buy. Connect the hoses to the color-coded red and green fittings on the back of the unit, plug in the attached power cord, run the hoses to your tub, and you're ready to fill and start. A breaker switch on the same back panel keeps the electrical side simple.

Built for Athletes and Backed for a Full Year

From weekend hobbyists to pros, the Revive Plunge was built with serious recovery in mind. Every unit carries a 1 year warranty, so if something goes wrong in that first year, you're covered. Optional premium product protection is available at checkout with a +2 Year Value Plan or a +3 Year Super Plan.

Shipping within the US is free, and in-stock units leave in 1 to 2 business days. Contact Us for international shipping. This chiller is also HSA/FSA eligible, which saves buyers an average of 30%.

A Simple Three-Chapter Approach to the Cold

Not a fan of cold water? You aren't the only one. Break each session into three parts:

• Chapter 1 is your warmup. A few deep, intentional breaths before you get in to focus your mind and body.
• Chapter 2 is the work. Deep inhales through your nose, slow exhales through your mouth, relaxing into the cold.
• Chapter 3 is the cool down. Stay on your breath once you're out and add gentle movement to reacclimate.

Frequently Asked Questions

What temperature range can the chiller reach?
It cools water to as low as 35°F and, with the heating option, warms it to as high as 107°F.

What is the horsepower of the chiller?
It runs a .8hp motor.

Is the filter washable and replaceable?
Yes. There's a washable metal mesh pre-filter and a built-in 20-micron filter, housed in the cylindrical filter canister on the back, that can be replaced when necessary.

Is any maintenance required?
Yes. Clean the built-in filter and the washable metal mesh pre-filter periodically, generally every 4 to 6 weeks depending on usage, and drain and clean the chiller at least once a year. Detailed maintenance instructions are in the product manual.

Do I need to buy anything else to connect it to my tub?
No. Two black quick-connect hoses are included and attach to the red and green fittings, which makes installation quick and easy.

Can I control it from a smartphone app?
Yes. A WiFi-controlled app, available on Google Play and the App Store, lets you customize your cold plunge from anywhere, as long as you have the app and a stable internet connection.

What type of filtration does it use?
A two-phase system with a built-in 20-micron filter and a washable metal mesh pre-filter.

What controls does it offer?
The WiFi app plus a black glass digital screen panel on the chiller itself, operated with the touch buttons on the screen.

Is it quiet while running?
Yes. It's built for ultra-fast and quiet cooling, so it stays a peaceful part of your setup.

How do I sanitize it before the first use?
Add Sirona Spa Care Oxidizer to the tub and run the chiller for 10 to 15 minutes.

Product Specs

The angled size diagram above carries measurement lines for each dimension and shows the black vented side grille and the black glass top control panel in place on the housing.